Ecomax CLF 26 Specifications download pdf (Page 15)

USE AND MAINTENANCE

Page 13

Before starting the machine, check that it has been installed correctly by a qualified

technician in compliance with all the indications contained in the documentation supplied

with the appliance.

Dispensers

for rinse-aid and detergent (optional)

Before starting the wash cycle, the dispensers and the

dispensing pipes must be full.

Check the levels of rinse-aid and detergent and top up if

necessary.

Never allow the rinse-aid and detergent containers to empty

completely. Do not top up with corrosive or impure products.

The warranty does not cover any damage or injury arising from the incorrect use of

dispensers.

3. First cycle

1. Turn on the external water stop cock.

2. Connect the power supply to the appliance by operating the external main switch.

3. Set the machine to “wash” mode by pressing switch [1]. The wash chamber will automatically

start to fill.

For appliances without detergent dispensers only.

Add detergent in the region of the pump suction filter every 5 cycles in

the amount recommended by the manufacturer. An average dosage

might be 1-2g/litre for powder detergents or double this amount for

liquid products. On first filling, and then at each subsequent changing

of the washing solution (at least three times per day), the dosage must

be sufficient for the amount of water in the chamber plus that used in

the next five rinses, as indicated in the section “installation data”. For

subsequent dosages only add the detergent required for the rinses.

4. Load the items to be washed into the racks: use racks suitable for the

type of item (long-stemmed glasses, tumbler, cups, ordinary plates,

large plates, cutlery, etc.) without overloading.

5. Remove large food particles; do not load dishes with dried-on or solid residue.

CLF 26

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Ecomax CLF 26 Specifications Page 15